1350 / 1650 Series
PANTHER ALL GEARED PRECISION
newMeticulous care is taken in selecting the right raw material for every component each and every component is passed through strict quality control and the machine is put to rigorous tests confirming to IS 1878 (PART-1) 1971 before dispatch from our ultra-modern plant having sophisticated mother machinery.
Additional Features :
- Flame Hardened Bedways
- Drop Worm Type Feed with Finger Tip Control for Easy Operation to Engage / Disengage Feed
- Hardened & Profile Ground Head Stock Gears
- Precisely Ground Alloy Steel Spindle is Mounted on Two Taper Roller Bearing at Front & One Roller Bearing at Rear End
Standard Accessories
- Hardened Guideways
- Electric Motor
- R/F Switch
- V-Belt
- Inch/mm Change Gears
- 2 Nos. Dead Centre
- Centre Bush
- Oil Can
- Set of Allen Keys and Spanners
- Screw Driver and Instruction Manual
Optional
Accessories
- D1-4 Camlock Spindle in lieu of A2/4Spindle
- 16 Spindle Speeds Ranging from 30 to 1250 RPM / 50 to 2000
- RPM with super Precision Bearings
- Starting Third Shaft with instantaneous Foot Brake and Control Panel
- Electric Coolant Pump with Tank & Fittings
- Rear Tool Post with Tool Holder
- Taper Turning Attachment
- Rear Splash Guard
- Face Plate
- Steady Rest
- Follow Rest
- Chuck Flange
- Single Dead Stop for Carriage
- Micro Meter
- Carriage Stop
- 5 Position Carriage Stop
- Machine Lamp with Control Transformer
- Quick Change tool Post with 5
- Tool Holders
- Tool Post Grinder (External/Internal)
- Key way Milling Attachment
- 4 Jaw Dog Chuck
- 3 Jaw True
- Chuck & Revolving Centre
- Anti Vibration Pads
SPECIFICATIONS
| MODEL | 1350/1 | 1350/2 | 1650/1 | 1650/2 | |
|---|---|---|---|---|---|
| HEIGHT FOR CENTRES | mm | 177 | 177 | 215 | 215 |
| SWING OVER BED | mm | 335 | 335 | 410 | 410 |
| SWING OVER CROSS SLIDE | mm | 200 | 200 | 240 | 240 |
| DIST. BETWEEN CENTRES | 540 | 1000 | 1000 | 1500 | |
| MOVEMENT OF CROSS SLIDE | mm | 210 | 210 | 250 | 250 |
| BED TYPE BED WIDTH | mm | 2 Flat & 2V 230 | 2 Flat & 2V 230 | 2 Flat & 2V 265 | 2 Flat & 2V 265 |
| TYPE & SIZE OF SPINDLE NOSE | A2 Size 4 | A2 Size 4 | A2 Size 4 | A2 Size 4 | |
| TAPER BORE IN CENTER BUSH | MT | 4 | 4 | 4 | 4 |
| SPINDLE BORE FOR A 2 SIZE 4 | mm | 42 | 42 | 42 | 42 |
| SPINDLE BORE FOR D 1 SIZE 4 | mm | 38 | 38 | 38 | 38 |
| SPINDLE DIAMETER | mm | 45 | 45 | 45 | 45 |
| TAPER BORE IN SPINDLE | MT | 4 | 4 | 4 | 4 |
| TRAVEL OF TOOL SLIDE | mm | 130 | 130 | 135 | 135 |
| NO. OF SPEEDS | RPM | 8 / 16 | 8 / 16 | 8 / 16 | 8 / 16 |
| RANGE | 45 - 938 / 30 - 1250 | 45 - 938 / 30 - 1250 | 45 - 938 / 30 - 1250 | 45 - 938 / 30 - 1250 | |
| LONGITUDINAL FEEDS | mm / Rev. | 65 / 0.05 to 0.8 | 65 / 0.05 to 0.8 | 65 / 0.05 to 0.8 | 65 / 0.05 to 0.8 |
| TRANSVERSE FEEDS | mm / Rev. | 65 / 0.03 to 0.48 | 65 / 0.03 to 0.48 | 65 / 0.03 to 0.48 | 65 / 0.03 to 0.48 |
| INCH | TPI | 65 / 4 to 60 | 65 / 4 to 60 | 65 / 4 to 60 | 65 / 4 to 60 |
| METRIC | mm | 54 / 0.35 to 6 | 54 / 0.35 to 6 | 54 / 0.35 to 6 | 54 / 0.35 to 6 |
| MAIN MOTOR | HP | 2 | 2 | 3 | 3 |
| POWER SUPPLY | Ph | 3 | 3 | 3 | 3 |
| GROSS WEIGHT | Kgs | 1000 | 1100 | 1400 | 1550 |
| OCCUPIED (L X W) | mm | 2350 x 1100 | 2800 x 1100 | 2800 x 1150 | 3350 x 1150 |
| PACKING DIMENSION | mm | 1750 x 1000 x 1300 | 2200 x 1000 x 1300 | 2200 x 1050 x 1350 | 2750 x 1050 x 1350 |
Please Note: The manufacturer reserve rights to modify design, specifications, mechanism, etc. to improve the performance of this machine without notice.
REQUEST OFFER