|
TEC' Power Operated Guillotine Shearing machines are sturdily constructed
and are designed for accuracy and dependability.
SIDE FRAMES: Are of solid steel plates designed for maximum rigidity
to eliminate deflection and to withstand continuous high speed
performance at full capacity.
BED OR TABLE : Is of closed box type construction, which
forms a rigid backbone for the shear and a solid backing for the
lower knife. Additional ribs under the table adds to its strength.
CUTTER BEAM : The ram is of solid steel plates, accurately machined.
The ram brace is bolted to the ram to adjust the camber which may
result after log use. The Ram moves in taper guides. This facilitates
easy adjustment of clearance between Ram & table for cutting
various thickness. Counter Balance springs are provided in overcrank
shearing machines of above 2500 x 8mm capacity to counter act the
weight of the ram & ram brace, thus giving smooth shearing action.
CRANKSHAFT: Is of forged carbon steel, accurately machined
and runs in gun metal bushes. Flywheel shaft runs in ball bearings.
HOLD DOWN : Steel fabricated and is used for clamping
the plate securely to the table while being cut. Spring loaded
machines mechanical hold down is provided in all machines. However,
in machines of 6mm capacity and above, pressure arms fitted to the
cross support, are provided for additional grip, before cutting.
HYDRAULIC HOLD DOWN (OPTIONAL) : Hydraulic hold down can be
provided in over crank Shearing at extra cost. It maintains a positive
& Uniform pressure along the full length of the work peice,
preventing slippage. Provision is kept for adjusting hydraulic pressure.
The pressure of each hold down unit is ample to securely hold even
a short piece which comes under only one hold down plunger.
BLADES : Four edged HC blades are provided.
ROLLING KEY CLUTCH : Made of alloy steel for positive
engagement and continuous operation, having three key way in the
EN-8 insert.
BRAKE : Constant spring loaded adjustable brake is provided.
GUAGES : Rigid and accurate construction of back gauge
provides consistent widths of sheets to be cut.
|
