MACHINERY & SPARES
 
 

CROSS SHAFT C FRAME MECHANICAL POWER PRESSES
 

Salient Features

- REDUCED NOISE AND VIBRATIONS.
- MINIMAL FRAME GAPPING, LOW ANGULAR DEFLECTION.
- HIGH RIGIDITY FRAME AND BOLSTER.
- HIGH PRECISION FORMING FOR LONGER DIE LIFE.
- HI-TOROUE PNEUMATICALLY OPERATED SINGLE DISC COMBINED CLUTCH & BRAKE UNIT.
- GEAR TRANSMISSION RUNS IN OIL BATH.
- WIDE SLIDE AND BOLSTER AREA.

FRAME & BOLSTER
HIGHLY RIGID FRAME & WIDE POINT SPACING
The highly rigid frame, slide & bolster hold the frame gap opening, frame elongation & bed deflection to the absolute minimum.
The wide point spacing enables these presses to withstand eccentric loads.

6 - POINT GIBS
THE MECHANISM THAT ENSURES HIGH PRECISION
The high quality power shaft is employed to give outstanding torsional rigidity. Long 6 point gibs, ensure that accuracy is maintained for a very long time. Die life is also greatly extended.

CLUTCH & BRAKE :
The single disc clutch & brake maintains correct heat balance. A high torque level and outstanding inching performance are assured

HYDRAULIC OVERLOAD PROTECTOR (OPTIONAL)
Prevents damage to the press & dies. If the rated load is exceeded, the press stops automatically to prevent damage to the press or dies. Since the hydraulic pressure can be released easily, operations can resumed smoothly even if jamming occurs.

SLIDE ADJUSTER
Easy to use motorised slide adjustment with digital display is provided as standard on SX-160, 200, 250, 315 & 400 models. The die height is displayed in units of 0.01 mm for precise slide adjustment
 
 

Technical Specifications

 Technical Specifications in MM for single point suspension power press
 MODEL - SX 25 32 40 63 100 160 200 250 315 400
A B A B A B A B A B A A A A A
     Force                       KN 250 320 400 630 1000 1600 2000 2500 3150 4000
 Rated Distance   
 before B.D.C.          		MM 3.5 2.2 3.5 2.2 4 2.2 5 2.5 5 2.5 6.3 6.3 6.3 8 12
 Number of
 Slide Strokes		 SPM 70 140 70 140 65 130 60 120 45 100 40 40 35 35 20
 Fly - Wheel
 energy		 KJ 4.4 3.0 4.4 3.0 8.0 4.6 16.75 7.8 25.0 12.5 55.0 70.0 80.0 120.0 240.0
 Stroke fixed MM 80 80 88 100 125 160 200 200 200 250
 Variable stroke
 (optional)		 MM 8 - 80 8 - 80 8 - 88 8 - 100 8 - 125 8 - 160 20 - 160 20 - 160 20 - 160 --
 Throat Depth MM 210 210 235 285 325 385 410 410 510 510
 Shut Height
 (Stroke Down, Adj. Up)		 MM 300 300 315 350 450 500 560 560 630 700
 Slide Adjustment MM 63 63 70 70 80 125 125 125 125 125
 Slide Area
 (L-R X F-B )		 MM 350 x 250 350 x 250 400 x 350 500 x 400 600 x 450 710 x 600 900 x 800 900 x 800 1200 x 800 1200 x 800
 Bolster Area
  (L-R X F-B )		 MM 630 x 400 630 x 400 800 x 450 900 x 550 1000 x 630 1120 x 750 1250 x 800 1250 x 800 1450 x 900 1450 x 900
 Bolster Thickness MM 75 75 75 90 90 120 150 150 150 175
 Bed Opening
 (L-R X F-B )		 MM 315 X 224 315 X 224 355 X 250 400 X 280 500 X 355 560 X 450 630 X 450 630 X 500 900 X 560 900 X 560
 Clear Distance
 between uprights		 MM 420 420 500 590 670 775 900 --- --- ---
 Main Motor KW X RPM 2.2x1500
2.2x1000		 2.2x1500
2.2x1000		 3.7x1500
3.7x1000		 5.5x1500
5.5x1000		 7.5x1500
7.5x1000		 15x1500
 		 15x1500
 		 18.5x1500
 		 22x1500 30x1500
Slide adjustment motor KW X RPM --- --- --- --- --- 1.1X1500 1.1X1500 1.5X1000 1.5X1000 2.2X1000
Height from floor to to of Bolster MM 800 800 900 900 900 900 900 900 900 900
Machine Weight approx KG. 2250 2100 2650 2500 3850 3600 6100 5600 9000 8500 18000 20000 28000 34000 38000
Required Air Pressure ATM 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5
Die Cushion Model

--

 DC-72 DC-72 DDC-82 DDC-102 DDC-123 3DC-144 3DC-144 3DC-164 DC - 002 30 125

DIE
CUSHION

 Force KN 17 17 44 70 100 200 200 270 300
Stroke Length MM 50 50 50 50 50 -75 100 100 100
Pressure pad area MM 290x200 290X200 335X230 380X260 475X330 535X425 600X425 600X475 850X520
Required air pressure ATM 7 7 7 7 7 7 7 7 7 5
 
 
 

 

Note

 Shut height at STD. MAX. stroke id the dist. betn. table surface & slide face with slide at bottom of stroke & ADJ. UP.